Welcome, Guest
Username: Password: Remember me
08 Oct 2017
Well, you've probably noticed by now that things look a little different around here. You are a keen observer!

The whole site is new and that includes all of the software that drives this forum. With probably over 10,000 settings and hundreds of back-end programs trying to talk to one another, there are bound to be a few glitches that we haven't discovered yet. So, if you happen to stumble upon anything that just doesn't seem right, give us a shout and we'll try to sort it out.

Thanks for using the VCOA Forum and enjoy the new look!
  • Page:
  • 1

TOPIC: Important Variable Speed Intermittant Windshield Wipers

Variable Speed Intermittant Windshield Wipers 6 years 2 months ago #50

  • JohnsonMY
  • JohnsonMY's Avatar Topic Author
  • Offline
  • Fresh Boarder
  • Fresh Boarder
  • Posts: 4
  • Thank you received: 0
You too can have variable speed intermittant windsheild wipers. The IPD intermittant wiper relay p/n 5531, for the 850 series will work on your car. For the second generation 960's and V/S90's it mounts behind the stereo. If you put the car in neutral, turn off power at the key, remove the stereo,( use a coin to push in the brackets, then pull them completely out, remove radio) relay is on the right side, it will be about double the size of the new relay and usually will be red. It should have 203, or L 203 printed on the top of the relay. Remove old relay and replace with new, making sure it is completely pushed into the block. Reinstall radio, and give it a test.:)

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
  • Not Allowed: to create new topic.
  • Not Allowed: to reply.
  • Not Allowed: to add attachements.
  • Not Allowed: to edit your message.
Time to create page: 0.411 seconds

Please publish modules in offcanvas position.